30' Activator Super V Light / Poker Run Edition
#273
Registered
Join Date: Sep 2013
Location: Fort Lauderdale, Florida
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Boat does look beautiful. I myself, have one concern though. I mentioned this awhile ago when I saw pics of the original canopy. The canopy has 0 support in the forward corners. Windows alone will not support the roof in a high speed rollover imho. Polycarbonate will flex and stretched acrylic will most likely shatter if subjected to a hard blow. Again, this is only my opinion. I think they are doing a fabulous job on this boat but you may want to address this with them considering the amount of power you will be installing. The corners could definitely use some support along with a,full side to side bulkhead under the roof and a stringer running up the center front where the glass halves meet.
#274
Registered
Boat does look beautiful. I myself, have one concern though. I mentioned this awhile ago when I saw pics of the original canopy. The canopy has 0 support in the forward corners. Windows alone will not support the roof in a high speed rollover imho. Polycarbonate will flex and stretched acrylic will most likely shatter if subjected to a hard blow. Again, this is only my opinion. I think they are doing a fabulous job on this boat but you may want to address this with them considering the amount of power you will be installing. The corners could definitely use some support along with a,full side to side bulkhead under the roof and a stringer running up the center front where the glass halves meet.
#275
Registered
Boat does look beautiful. I myself, have one concern though. I mentioned this awhile ago when I saw pics of the original canopy. The canopy has 0 support in the forward corners. Windows alone will not support the roof in a high speed rollover imho. Polycarbonate will flex and stretched acrylic will most likely shatter if subjected to a hard blow. Again, this is only my opinion. I think they are doing a fabulous job on this boat but you may want to address this with them considering the amount of power you will be installing. The corners could definitely use some support along with a,full side to side bulkhead under the roof and a stringer running up the center front where the glass halves meet.
#277
Registered
Your more then welcome to post. Some pics where friendly lol . I'm putting the big motor in first and do some poker runs and enjoy the boat. Then later on this season I may swap out drive train and do a local race or two I know mark plans on racing his early this season
#278
Registered
Join Date: Sep 2013
Location: Fort Lauderdale, Florida
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
#280
Registered