30' Activator Super V Light / Poker Run Edition
#506
Registered
so drive height is located so the scx4 gear case ski's
put a minus 1 or 2 on it and your at 1/2 inch for the rule book
am i thinking right
what is the x or is that top secret
put a minus 1 or 2 on it and your at 1/2 inch for the rule book
am i thinking right
what is the x or is that top secret
#507
Registered
It's above the bottom with the surface drive. And below with reg bravo style depending on spacer
#508
Registered
gotcha,
anxious to see how you mount the engine on divinycell stringers and other rigging as well,
typhoons' typing more than me but i lost sleep waiting for the throttle lever to get turned around so the trim button was facing the right way (post 470 pics)
thanks
anxious to see how you mount the engine on divinycell stringers and other rigging as well,
typhoons' typing more than me but i lost sleep waiting for the throttle lever to get turned around so the trim button was facing the right way (post 470 pics)
thanks
#509
Registered
The stringers are made of 1 in composite board wrapped in 2 layers of 2408 biaxialand 1 oz mat. The engine mounts are mercury plate mount on a double aluminum rail over the stringer with a front and back foot on each side of the engine plate.
#510
Registered
Thats funny . The engine mounts they made or real nice when i get em back from anodize ill post pic