Cup size for Tantrum
#11
Registered
Thread Starter
Some of the screws at the bottom .. whetever they screw into.. i thought wood.. are stripped. When it goes up it`s all lopsided.
Side with lift goes up quite a bit before the other side follows. Any remedies?
#13
Registered
Thread Starter
#14
Registered
Join Date: Jul 2006
Location: Rockwood MI. Kalkaska MI. Sopron Hungary.
Posts: 1,558
Received 0 Likes
on
0 Posts
I thought there was wood in there, haven`t taken it apart thou.
Some of the screws at the bottom .. whetever they screw into.. i thought wood.. are stripped. When it goes up it`s all lopsided.
Side with lift goes up quite a bit before the other side follows. Any remedies?
Some of the screws at the bottom .. whetever they screw into.. i thought wood.. are stripped. When it goes up it`s all lopsided.
Side with lift goes up quite a bit before the other side follows. Any remedies?
#15
Registered
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
#17
Registered
Thread Starter
I can snap a picture for ya.. so you sayin yours does the same?
#18
Registered
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
#19
Registered
Thread Starter
Heres the pic.
the shock is fine.. pretty strong actually, I had a hard time pushing it back down.
And yes theres no wood in there now that I took if off and saw underneath.
The lift bends the fiberglass base and overtime that strips the screws attached to the starboard. There is a piece of that starboard stuff thats broken.. I`ll have to figure out a way to fix that.
btw, Addiction were you the one that posted the pics of your interior? you had some things powdercoated? Am I remembering right?
I`m sending the rails and grab handles out.. would like other ideas, thanx
the shock is fine.. pretty strong actually, I had a hard time pushing it back down.
And yes theres no wood in there now that I took if off and saw underneath.
The lift bends the fiberglass base and overtime that strips the screws attached to the starboard. There is a piece of that starboard stuff thats broken.. I`ll have to figure out a way to fix that.
btw, Addiction were you the one that posted the pics of your interior? you had some things powdercoated? Am I remembering right?
I`m sending the rails and grab handles out.. would like other ideas, thanx
Last edited by ICDEDPPL; 11-23-2009 at 05:55 PM.