Notices

24 ft thunder

Thread Tools
 
Old 06-09-2013, 06:50 PM
  #1  
Registered
Platinum Member
Thread Starter
 
Join Date: Apr 2010
Location: coal city il
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default 24 ft thunder

1993 24 ft thunder. Does anyone have any info weight ect.. on this hull? own one and was curious, I think its the same mold as a 25 tantrum. the boat Is great no creeks rattles absolutely love the boat no complaints. Looking at going to -2 imco anyone done this. The prop shaft is deep at 8 inches. Motor should be around 650 to 675 hp this year want to make it to the 80s is this possible?
smokem68 is offline  
Old 06-10-2013, 10:50 AM
  #2  
Platinum Member
Platinum Member
 
1980Condor460's Avatar
 
Join Date: Jun 2010
Location: OKC, OK
Posts: 300
Received 0 Likes on 0 Posts
Default

How about some pics???
1980Condor460 is offline  
Old 06-10-2013, 12:48 PM
  #3  
Registered
Platinum Member
Thread Starter
 
Join Date: Apr 2010
Location: coal city il
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

I have to learn how first I will try later.
smokem68 is offline  
Old 06-10-2013, 05:01 PM
  #4  
Registered
 
ActiveThunder's Avatar
 
Join Date: Oct 2000
Location: Pompano Beach, Florida
Posts: 3,528
Received 10 Likes on 7 Posts
Default

24 is the 25 Tantrum. Same molds. Great boat!! If you need any help setting it up please drop me an e-mail or call.

Pat
ActiveThunder is offline  
Old 07-09-2013, 01:49 PM
  #5  
Registered
 
Join Date: Aug 2009
Location: Somers Point, NJ
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

That should be very obtainable with that power. I run 80 gps. with a 500EFI (585hp) with a Bravo 28 (BBlades) with my 00' 25 AT. Good luck!
25AT500EFI is offline  
Old 07-09-2013, 07:18 PM
  #6  
Registered
Platinum Member
Thread Starter
 
Join Date: Apr 2010
Location: coal city il
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

We will find out hopefully Thurs I am running a -2 shorty to see what happens my prop shaft will now be 4.5 below.
smokem68 is offline  
Old 07-09-2013, 09:08 PM
  #7  
Registered
 
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes on 0 Posts
Default

what Prop will you be spinning?

Am I missing something? Standard prop depth 8". -2 shorty new prop depth 4.5"... Did you change something else?
My Addiction is offline  
Old 07-10-2013, 01:05 PM
  #8  
Registered
Platinum Member
Thread Starter
 
Join Date: Apr 2010
Location: coal city il
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Let me measure again but no I have changed nothing I was almost positive I was at 6.5 before the Shorty ill check this afternoon
smokem68 is offline  
Old 07-10-2013, 10:57 PM
  #9  
Registered
 
Join Date: Oct 2007
Location: marbury, md
Posts: 1,224
Likes: 0
Received 0 Likes on 0 Posts
Default

what prop?
My Addiction is offline  
Old 07-13-2013, 10:47 AM
  #10  
Registered
Platinum Member
Thread Starter
 
Join Date: Apr 2010
Location: coal city il
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

well I measured again but I trim the drive to level the nosecone will hit the trailer. Im guessing u were right My Addiction because I was at like 4 3/4 and was not level. For the prop I was going to start with a bravo 25. Had Idle issues and didn't want to waste Mr. Youngs time as he was just finishing a previous tune. He gave me great advise on getting the motor straight! So in other words I need to try again. If you have any suggestions Im more than willing to listen.
smokem68 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.