Extreme Measures... Make Over Edition
The following users liked this post:
Rookie (12-17-2020)
The following users liked this post:
distantthunder (01-19-2021)
#43
Registered
Thread Starter
Update: EFI is all hooked up with the new LS style coil near plug setup. The coils clear the headers with ~3/8" to spare. Sensors are working on the digital dash. Hopefully to the dyno soon.
.
.
The following 7 users liked this post by Rookie:
abones (01-28-2021), camptappakeg69 (02-07-2021), F-2 Speedy (02-04-2021), payuppsucker (01-28-2021), SUPERSTITIOUS (02-23-2021), Sydwayz (01-28-2021), TomZ (01-28-2021)
#45
Registered
Thread Starter
No. There is a separate harness for each bank and 1 separate 14 gauge 12v wire running to each bank. If you are thinking high voltage interference I don't believe the 14 gauge wire would have any issues with the injector harness. (it did cross my mind)
The following users liked this post:
payuppsucker (01-28-2021)
The following 5 users liked this post by Rookie:
abones (02-24-2021), camptappakeg69 (02-07-2021), IGetWet (02-04-2021), SUPERSTITIOUS (02-23-2021), Sydwayz (02-04-2021)
#47
Registered
Thread Starter
Stopped by my upholsterer today and picked up my sunpad and backseat inserts. I think they turned out pretty good. All of the diamond inserts are sitting on my fresh silver sunpad.
Last edited by Rookie; 02-24-2021 at 07:10 PM.
The following 6 users liked this post by Rookie:
Griff (02-23-2021), payuppsucker (02-24-2021), rak rua (02-24-2021), SC288 (02-23-2021), SUPERSTITIOUS (02-23-2021), TomZ (02-23-2021)
#49
Registered
Thread Starter
Dark Gray Diamond.
They have all sorts of colors. My upholsterer said that it was quality name brand material.
https://www.ebay.com/itm/Marine-Viny...YAAOSwqJtgBgHO
They have all sorts of colors. My upholsterer said that it was quality name brand material.
https://www.ebay.com/itm/Marine-Viny...YAAOSwqJtgBgHO
The following users liked this post:
payuppsucker (02-24-2021)
#50
Registered
Thread Starter
The following users liked this post:
payuppsucker (02-24-2021)