Remedy 2.0
#101
Platinum Member
Platinum Member
Thread Starter
Well we haven't done very much in the way of boating or anything else since my wife's wreck back in June. I pulled Remedy out a few weeks ago and got all the winterizing finished, so she's good until next year. Also had a friend call me from the local embroidery shop and told me he had something I needed to pick up. Well I get there and he had a piece of black carbon fiber vinyl with the AT logo embroidered on it in the perfect size for my Isotta steering wheel. I took a sometime yesterday afternoon to get it installed and it turned out great I think. Also there will be a few more small updates towards spring that we are looking forward to finishing up.
The following 4 users liked this post by bencini231:
#102
Platinum Member
Platinum Member
Chris who did the center wheel logo ?
#103
Platinum Member
Platinum Member
Thread Starter
The following users liked this post:
F-2 Speedy (11-21-2022)
#104
Platinum Member
Platinum Member
#105
Platinum Member
Platinum Member
Thread Starter
#106
Platinum Member
Platinum Member
Thread Starter
Well I've been reading and watching many people with power levels a little lower than mine and having issues with the Imco SC lowers. Finally made a few calls to verify some of the issues they were having and thought to myself I really dont want to chance anything and wreck a nice new pair of Imco SCX uppers if my SC lowers break. I sent my Uppers back to Imco and had them mount the dual downshaft lowers with a 2 inch spacers and 1 7/16 propshafts. Only reason for having them mount the lowers is they run them on their dyno and send them full of oil and peace of mind if anything goes wrong it lessens it being my fault. Also learned the SCX combo is rotaation specific during this swap. I think we will be pretty well taken care of now since we have Drive Gaurdians and now full SCX drives. Brad @ IMCO took great care of us and got everything shipped to us in less than 2 weeks. Remedy will be heading back to Eddie Young's in a few weeks for drive install and a little pulley swap on the 3.8's for a little power boost.
Last edited by bencini231; 03-19-2023 at 10:43 PM.
The following 3 users liked this post by bencini231:
#107
Registered
SCX combo is rotation specific?? Something to do with the dual down shaft lowers?
#108
Platinum Member
Platinum Member
Thread Starter
#109
Platinum Member
Platinum Member
you have to much money.................looks nice
The following users liked this post:
bencini231 (03-20-2023)
#110
Platinum Member
Platinum Member
Thread Starter