Need help Pat!!!!
#1
Registered
Thread Starter
Join Date: Apr 2003
Location: Janesville,Wi
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Need help Pat!!!!
Pat I took the bolsters out of the 96 32 active thunder I want to replace the screws that hold them in can I go alittle longer on them or is there something underneath them??
Jason
Jason
#2
Charter Member # 55
Charter Member
Re: Need help Pat!!!!
Try putting a piece of wire down the holes and see how far it goes. Might have fuel tank below the mounts nearest the center of the boat. Longer won't really do much if the floor is an inch thick.
You may also have a boat built prior to Pat owning AT.
You may also have a boat built prior to Pat owning AT.
#3
Re: Need help Pat!!!!
Jason,
Griff is correct. The tanks are just below the floor proabably less than an inch. The coat hanger probe is a good idea. We currently have an aluminum plate we attach under the floor. If your pirelli is still out you might explore this option as well.
Pat.
Griff is correct. The tanks are just below the floor proabably less than an inch. The coat hanger probe is a good idea. We currently have an aluminum plate we attach under the floor. If your pirelli is still out you might explore this option as well.
Pat.
#6
Registered
Join Date: Oct 2000
Location: New York, NY - Manhattan BABY!
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help Pat!!!!
Originally Posted by ATPatrick
Miller, I will have another new one tomorrow night. stay tuned.
miller