Another Idea
03-22-2002, 12:00 PM
#1
Charter Member #9/ Moderator
Charter MemberThread Starter
Join Date: Oct 2000
Location: Phoenix, AZ, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Another Idea
We know that there are many similarities in each Advantage model. But what the heck. How about posting a few pictures of the interior of your boat, including the engine compartment. Here are some of mine.
__________________
Art
Art
03-22-2002, 01:50 PM
#5
Registered
Join Date: Jun 2001
Location: Lake St Clair, Michigan
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
Well I dont have any of mine really, and it's shrinkwrapped for at least another month, then I'm pulling the motors, scrubbing up the engine compartment, and motors, and puttin em back in, I'm hopein the cockpit and cabin are as shiny & clean as they were when I shrinkwrapped it. They should be... I'll get some pic's when I do all of that.
Hey lakeracer, I see the exhaust, are those full manifolds, and risers, or are they just risers on stock manifolds?? Did you see any gain's in performance? What kind are they?
Hey lakeracer, I see the exhaust, are those full manifolds, and risers, or are they just risers on stock manifolds?? Did you see any gain's in performance? What kind are they?
Last edited by Advantage_Rob; 03-22-2002 at 02:19 PM.
03-22-2002, 03:07 PM
#6
Charter Member
Join Date: Apr 2001
Location: Albuquerque, NM
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
nice ss risers
Lakeracer,
good looking risers...I bet you got one heck of deal on those
I checked on the purple fenders no luck...
Have a good weekend, let me know if the problem stays away.
Don B.
good looking risers...I bet you got one heck of deal on those
I checked on the purple fenders no luck...
Have a good weekend, let me know if the problem stays away.
Don B.
04-02-2002, 11:39 PM
#7
Charter Member #9/ Moderator
Charter MemberThread Starter
Join Date: Oct 2000
Location: Phoenix, AZ, USA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Cool
Thanks Don,
The stainless risers did the trick. No more problems. Rob, they are EMI Thunders with stainless risers. I had a reversion problem with the original set of risers and changed them out. When I originally installed them, I believe I picked up about 100-150 rpms. Top speed for me is 72-73mph on a cool day at Lake Havasu. Stock 502 Mags except for the exhaust.
Thanks for your help Don. I'll tell Donnie, no luck with the fenders.
Art
The stainless risers did the trick. No more problems. Rob, they are EMI Thunders with stainless risers. I had a reversion problem with the original set of risers and changed them out. When I originally installed them, I believe I picked up about 100-150 rpms. Top speed for me is 72-73mph on a cool day at Lake Havasu. Stock 502 Mags except for the exhaust.
Thanks for your help Don. I'll tell Donnie, no luck with the fenders.
Art
__________________
Art
Art
