84.2 mph on bravo 24 tubin prop
10-30-2013, 07:03 PM
#1
Registered
Thread Starter
Join Date: Apr 2005
Location: LITCHFIELD,IL.
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
11-03-2013, 06:13 AM
#2
Registered
Join Date: Nov 2013
Location: Solomons Island, MD
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
11-03-2013, 03:33 PM
#4
Registered
Thread Starter
Join Date: Apr 2005
Location: LITCHFIELD,IL.
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
You will see me put the tunnel tabs down a little bit with my left hand as soon as it airs out they are brought all the way up then there is no porpoising until u slow back down
Last edited by schnydo; 11-03-2013 at 03:37 PM.
11-04-2013, 10:38 AM
#5
Registered
Join Date: Nov 2013
Location: Solomons Island, MD
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
11-06-2013, 05:11 PM
#9
Registered
Join Date: Nov 2013
Location: Solomons Island, MD
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Mine is a Holley HP 850...made 700hp at 6000 RPM`s, MSD, CMI completely dry exhaust system. I may have to increase carb size to get enough flow. What are your RPM`s at WOT?
Dart Big M block 540ci, all the good stuff inside, figured I`d go large so I didn`t wish I did later
Dart Big M block 540ci, all the good stuff inside, figured I`d go large so I didn`t wish I did later
