41' Apache and Arnesons
#1
Registered
Thread Starter
Join Date: Nov 2008
Location: Naperville, IL
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
41' Apache and Arnesons
Does anyone have any experience with a 41' with Arnesons? Im curious how the attitude of the boat is with significant reduction of weight on transom as well as trim angles.
Dr. G
Dr. G
#4
Registered
if there's not enough bow lift you could also add some rocker tab's sold by arneson .
but I think with all the weight of the motor's in the stern you should still have some nice bow rise , pm Rick Im sure he would no if there has been any installed on a Apache or maybe you could also compare to a straight bottom cig
but I think with all the weight of the motor's in the stern you should still have some nice bow rise , pm Rick Im sure he would no if there has been any installed on a Apache or maybe you could also compare to a straight bottom cig
#8
Registered
I don't see why it wouldn't work, Apaches run nose high with very little trim. I would fill the notch and mount the Arnesons low. How high are the guys running sixes on the 41s?
#10
Registered