why is my cat doing this????
#3
Registered
![Default](/forums/images/icons/icon1.gif)
Props turning inward or out, my boat did the same turning in switched to outwaed and it went away. Just a thought!
#4
Registered User
Thread Starter
Join Date: May 2011
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
ive tried inwards and outwards no change.
weight in the from makes it worse i think its too much transom lift .
what prop dia for ssm #4 are working the best and X dimension ?
weight in the from makes it worse i think its too much transom lift .
what prop dia for ssm #4 are working the best and X dimension ?
#8
Registered User
Thread Starter
Join Date: May 2011
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
4.25" Above
17" Dia Props
#4's On Boxes
Drives Are 56" Apart.
This Is A Drawing To Scale From The Rear. Looks To Me Like I Would Get More Water On The Inside Of The Tunnel And More Bow Lift With The Props Turning Out.
17" Dia Props
#4's On Boxes
Drives Are 56" Apart.
This Is A Drawing To Scale From The Rear. Looks To Me Like I Would Get More Water On The Inside Of The Tunnel And More Bow Lift With The Props Turning Out.
#10
Registered
![Default](/forums/images/icons/icon1.gif)
I'm 2.75 above the bottom. 17.5 dia. props....I'm going to try turning out... Why you ask? Because looking for better handling and I've never tried it.
Tseph has a similar setup to you and I....I'm waiting to see how his runs
Tseph has a similar setup to you and I....I'm waiting to see how his runs