Winter projects for the boat, lets see em'
#61
Gold Member
Gold Member
Join Date: Oct 2001
Location: Haslet, TX,USA
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
#62
Registered
VIP Member
Join Date: Apr 2005
Location: Cary, ILL
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
Thanks everyone! Just got back and seen the responses.
30 Outlaw,
That looks sweet! Did you have to pull the motors to get them in? Was it difficult to keep the Q&Q option? Did you put them in yourself? As a side note have you ever tried labbed 27 mirages? I got 77mph on GPS this summer with them at about 4900 to 5000 rpm. I also bought a set of Mercury labbed 26p Bravo's for Lake Erie (in rough water the 3 blades break loose real easy) and was hitting the limitter hard and seen 73mph. The 27's might be a nice fit. If you ever get over this way I would let you try them if you like.
30 Outlaw,
That looks sweet! Did you have to pull the motors to get them in? Was it difficult to keep the Q&Q option? Did you put them in yourself? As a side note have you ever tried labbed 27 mirages? I got 77mph on GPS this summer with them at about 4900 to 5000 rpm. I also bought a set of Mercury labbed 26p Bravo's for Lake Erie (in rough water the 3 blades break loose real easy) and was hitting the limitter hard and seen 73mph. The 27's might be a nice fit. If you ever get over this way I would let you try them if you like.
I did however do the install on the Q&Q what a pain. Ttook me 5 hours That's only one motor... I had to cut my down tube on the Q&Q 1 inch because they were hitting the Y tube. Just a lot little things. In the end, all in all Im happy with it. Just waiting on my other Q&Q setup for the port engine.
As far as the props... I have not tried a 3 bladed prop. I might have to take you up on the offer if im in Ohio...
#66
Registered
Join Date: Mar 2005
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
A few more...had the gelcote redone from the moulding down to the chine to cover the factory graphics. I went with viynl (sp?) until I can come up with what I really want to do...the logo and numbers are from my pinstripe/airbrush guy...
#69
Registered
Join Date: Feb 2004
Location: Shelby, Ohio
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Dave-01,
Very nice handy work. Did you make the white plastic doors yourself? Are you interested in selling them when you change the other side? How much did you have to shorten the seat by?
Very nice handy work. Did you make the white plastic doors yourself? Are you interested in selling them when you change the other side? How much did you have to shorten the seat by?