aluminum cupholders for 36 Outlaw
#1
VIP Member
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I want to replace the cupholders in my 36 Outlaw. There are 2 in the back seat and a total of four in the lounges in the cabin. My problem is I cannot find any that are the same size as what I have. Does anybody have some that drop right in?? I guess I could make the holes bigger, but I would think this to be a standard item. Any help would be appreciated.
Thanks,
Smitty
Thanks,
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#2
Registered
![Default](/forums/images/icons/icon1.gif)
i know in my islander 4, out of the 6 were not drop in. the holes cut were larger than the smaller size (from trick marine) needed, but the larger cups didnt have enough lip edge clearance. i just ended up using silicon on the bottom of the lip to secure them.
#4
VIP Member
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Boss302
Do you have a web address or a phone number for Ron's?? I am just outside chicago.
Thanks !!!
Do you have a web address or a phone number for Ron's?? I am just outside chicago.
Thanks !!!
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#5
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Hawkeye usually has them
800-203-8463
in a variety of colors also.
800-203-8463
in a variety of colors also.
#6
VIP Member
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks JT
I have some on the way !!!
Smitty
I have some on the way !!!
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Thread
Thread Starter
Forum
Replies
Last Post
jmeng
Trucks, Trailers and Transportation
18
06-14-2007 11:25 AM