Go Back  Offshoreonly.com > Owners Forum > Baja
502 Mag vapor locking??? >

502 Mag vapor locking???

Notices

502 Mag vapor locking???

Thread Tools
 
Old 06-16-2008, 02:21 PM
  #1  
Registered
Thread Starter
 
Join Date: May 2005
Location: Nashville, Tennessee
Posts: 209
Likes: 0
Received 0 Likes on 0 Posts
Default 502 Mag vapor locking???

i have a 97 outlaw with a 502 Mag....basically it runs flawless when i first start it up and run it cold....when i sit all day and go to leave it fires right up again but when i go to take off it sputters and wont plane out....i can throw it in neutral and it barely will idle...ive been pumping the throttle trying to clean it out and it usually will kill it....it does that a couple times (2-3 minutes) and then all of the sudden it will just fire right up and run perfectly again? It also doesnt do this every time, its sporatic but always after i run it and then sit for a while. vapor locking? fuel filter? anyone had this problem or ideas where to start looking?
will22 is offline  
Old 06-16-2008, 02:55 PM
  #2  
Registered
 
Join Date: Oct 2007
Location: LOTO/Performance Boat Center
Posts: 794
Received 62 Likes on 17 Posts
Default

Service bulletin 99-07, Pump booster kit 862264A4 will fix the problem. I can get you one if you need it!

Brett
BrettM is offline  
Old 06-16-2008, 03:11 PM
  #3  
Registered
 
Join Date: Feb 2004
Location: MT. JULIET, TN.
Posts: 3,710
Received 2 Likes on 1 Post
Talking

They can't run on just air!

Last edited by kennyo; 06-16-2008 at 04:45 PM.
kennyo is offline  
Old 06-16-2008, 03:43 PM
  #4  
Charter Member #1171
Charter Member
 
obnoxus's Avatar
 
Join Date: Feb 2001
Location: Clearwater, FL
Posts: 4,019
Received 21 Likes on 16 Posts
Default

Yup,,, Ill bet you dont have the mechanical pump on your sea pump,,, Merc eliminated this for a short time.

If so ,,, install the kit mentioned above and all will be well !!!!
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
obnoxus is offline  
Old 06-16-2008, 03:52 PM
  #5  
Registered
Thread Starter
 
Join Date: May 2005
Location: Nashville, Tennessee
Posts: 209
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by nebraskabaja
Service bulletin 99-07, Pump booster kit 862264A4 will fix the problem. I can get you one if you need it!

Brett
thanks for the help, but what exactly is this booster kit fixing? is it vapor lock or some other gremlin?
will22 is offline  
Old 06-16-2008, 04:46 PM
  #6  
Registered
 
Join Date: Feb 2004
Location: MT. JULIET, TN.
Posts: 3,710
Received 2 Likes on 1 Post
I'm I smooth or what! Quit cutting your fuel with biodiesel!
kennyo is offline  
Old 06-16-2008, 05:10 PM
  #7  
Registered
Thread Starter
 
Join Date: May 2005
Location: Nashville, Tennessee
Posts: 209
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by kennyo
I'm I smooth or what! Quit cutting your fuel with biodiesel!
we all cant have those flux capacitors like you big balla...now get busy im trying to get a real answer...
will22 is offline  
Old 06-16-2008, 06:16 PM
  #8  
Registered
 
Join Date: Oct 2007
Location: LOTO/Performance Boat Center
Posts: 794
Received 62 Likes on 17 Posts
Default

Yes, Vapor locking is the problem. It is quite common on the 454-502 MPI's. The fuel boils and creates a lock in side the fuel filter and the stock pump is not enough to suck it through. This pump is a secondary pump that creates the pressure to eliminate the lock!

Brett
402-464-4791
BrettM is offline  
Old 06-22-2008, 08:47 PM
  #9  
Platinum Member
Platinum Member
 
eddie's Avatar
 
Join Date: Oct 2007
Location: Osage Beach, Missouri - 28mm
Posts: 2,254
Received 19 Likes on 6 Posts
Default

Originally Posted by will22
thanks for the help, but what exactly is this booster kit fixing? is it vapor lock or some other gremlin?
If you want to double check, spin your fuel/water filter off and check the level. If this is your problem it will be down 1/4 to 1/2 inside the filter.

The kit will fix this problem.
eddie is offline  
Old 06-22-2008, 10:08 PM
  #10  
Registered
 
JasonSmith's Avatar
 
Join Date: Feb 2005
Location: USA
Posts: 4,333
Received 3 Likes on 3 Posts
Default

Get the kit. PBC can take care of ya!
Eddie can too, but in a different way.
JasonSmith is offline  


Quick Reply: 502 Mag vapor locking???


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.