29 Outlaw owners - need help
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
The hatch lift finally gave up on me. Would someone be so kind as to measure the overall length of the actuator for me so I can order one.
Thanks!
Thanks!
![Drink](/forums/images/smilies/drink.gif)
#2
Custom Interiors & More
![Default](/forums/images/icons/icon1.gif)
Jason,
If I still had my 29ol I could just measure it to be sure, but I think it was a 24" (opposite) meaning that the 1/2" bolt hole is at 90 degrees to the electric motor on a stock Acculift unit. Try calling (519) 727-4255 for more information.![Cool](/forums/images/smilies/cool.gif)
XT
If I still had my 29ol I could just measure it to be sure, but I think it was a 24" (opposite) meaning that the 1/2" bolt hole is at 90 degrees to the electric motor on a stock Acculift unit. Try calling (519) 727-4255 for more information.
![Cool](/forums/images/smilies/cool.gif)
XT
#3
Registered
Join Date: May 2005
Location: Austin, Texas
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
Thread Starter
#9
Never Enuff
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Apr 2006
Location: Cedar Creek, Texas
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
If anybody needs a back up---that would be you
Buy that 30--then put Dock's blower motors in it and finally get to the triple digit mark. It would probably make Ben happy too---
Jay
![EEK!](/forums/images/smilies/eek.gif)
Jay
#10
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Ben is a happy camper! He has more work right now because of what he has accomplished with my motors than he can keep up with.
MEFITUNING.COM is his site. I think he is working on some 600 Hawks right now that are going to go from carbs to EFI.
MEFITUNING.COM is his site. I think he is working on some 600 Hawks right now that are going to go from carbs to EFI.