shorties on a 2000 36 Outlaw
#11
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
I have a 05 36 with boxes XR's and 525's 30 labed 4 blades
the "X" was raised 1 inch , the gps says 78- 80 at 5250 rpm's
there are no other 36 outlaws where I boat so i dont know if these are good #'s or not. It comes out of the hole great. I've tryed other props with no gain. I think the set up works great
and the only way to go any faster would be big bucks on HP.does any one know what the pick in mph would be with shorites and boxes. thanks
the "X" was raised 1 inch , the gps says 78- 80 at 5250 rpm's
there are no other 36 outlaws where I boat so i dont know if these are good #'s or not. It comes out of the hole great. I've tryed other props with no gain. I think the set up works great
and the only way to go any faster would be big bucks on HP.does any one know what the pick in mph would be with shorites and boxes. thanks
( advertised at 570 hp) with boxes.
He's seeing about the same speeds you are, running
the same size props too.
I'd say you are getting decent #'s with it.
His drives seem rather low compared to mine,
but, I have to run 5 blades on mine for best results.
Shorties may help, but you may need 5 blades to
make them work.
#13
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Harper220
Baja
12
02-02-2006 05:46 PM