F*@king hoses!
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
For the second time in a season I have destroyed a coolant hose. Why? Same motor. I don't run thermostats & I'm sure there are no restrictions in the coolers or block.
Do you suppose the hoses are just old like Neverenough?
Do you suppose the hoses are just old like Neverenough?
#2
VIP Member
![Default](/forums/images/icons/icon1.gif)
Which hose is it?? Make sure you have absolutely no restrictions in any of your coolers. I had some small impeller pieces in the oil cooler, and the older of the hoses tore right open at about 70 mph !!!
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#3
Never Enuff
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Apr 2006
Location: Cedar Creek, Texas
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
You been doing real good the last couple of weeks then bingo--you start to bubble over again
If you want something reliable I told you to buy those blower motors from Dock----it's a good thing you got Ben on retainer---
Come on down to Travis--we'll take my boat and we can boat all day and still get back to the dock in one piece-----
Jay
![EEK!](/forums/images/smilies/eek.gif)
Come on down to Travis--we'll take my boat and we can boat all day and still get back to the dock in one piece-----
Jay
#4
Charter Member #34
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 2 Likes
on
2 Posts
![Default](/forums/images/icons/icon1.gif)
You been doing real good the last couple of weeks then bingo--you start to bubble over again
If you want something reliable I told you to buy those blower motors from Dock----it's a good thing you got Ben on retainer---
Come on down to Travis--we'll take my boat and we can boat all day and still get back to the dock in one piece-----
Jay
![EEK!](/forums/images/smilies/eek.gif)
Come on down to Travis--we'll take my boat and we can boat all day and still get back to the dock in one piece-----
Jay
![Food Smiley 007](/forums/images/smilies/food-smiley-007.gif)
#5
Registered
Join Date: Apr 2006
Location: Mechanicsville MD
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Check your hose going threw your gimble housing.Pull the plastic 1 1/4 hose fitting off the inside on your transom housing and you might find the hose is collapsed. I have had countless boats from 1989 threw 2000 with this hose closed down to about a pencil diameter, boat will run fine on the hose at the house and temps will be fine at cruising speed but when you get into the throttles water temps climb. which will lead to steam pockets in the cylinder heads around number 7 cylinder and number 8 cylinder, once steam gets there water will not go there and next thing is droped valve seats burnt up impellers from not enough flow/ volume of water, over heating etc..
#6
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
You need to buy "tanker truck hose",I bought mine from a industrial hose supplier locally,its hard to work with and has a steel wire re-inforcing it but it NEVER fails,Smitty
#9
Registered
![Default](/forums/images/icons/icon1.gif)
Jason...why dont you change all your hoses to JIC fittings? I can get the hoses for you if you want for a price that no one can beat...unless theirs are for free, but the hoses that I use all have a minumum of 20K psi. You blow that hose up then you really have something.