anyone know where I can get baja stickers?
#11
Registered
Jason, If you have a shop that will do the decals I'd like some as well. I would like to replace the ones on the side of the boat towards the rear but the decal is different than whats in the 1990 brochere (sp)
#12
Guest
Posts: n/a
Playn
I have a picture of that logo, cause that is what Im having redone as well. If you would like e-mail me at [email protected] so I can send you the a picture of what im talking about. Im not that good with computers, otherwise I would send it to the site.
SEA-YA!!! Randy
I have a picture of that logo, cause that is what Im having redone as well. If you would like e-mail me at [email protected] so I can send you the a picture of what im talking about. Im not that good with computers, otherwise I would send it to the site.
SEA-YA!!! Randy
#15
Registered
Join Date: Jul 2001
Location: Twin Lake, Michigan
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
Ok Jayl13,
You have the design I want too. Anyone get prices on these yet? Would It help if we all bought them together? I could use at least 2 but if the price is right I would be interested in about 5. Let me know what you find out!!
You have the design I want too. Anyone get prices on these yet? Would It help if we all bought them together? I could use at least 2 but if the price is right I would be interested in about 5. Let me know what you find out!!
#16
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
I think it is going to depend on ths size personally
if you want small like 5-6 inches wide, then that is not bad, if you want like 24 inches, then that is a different ballgame
Honestly, I have not had a chance yet, Just had to drop a deposit off at the marina yesterday for them to order my parts ect.
Can someone please remove the arm that they shoved up my ass???
Thanks
Jason
if you want small like 5-6 inches wide, then that is not bad, if you want like 24 inches, then that is a different ballgame
Honestly, I have not had a chance yet, Just had to drop a deposit off at the marina yesterday for them to order my parts ect.
Can someone please remove the arm that they shoved up my ass???
Thanks
Jason
#17
Guest
Posts: n/a
Hey you all I am working with Clint from Geographics and he is doing my logo which between yours and the new one. Jayl13 you know the one I sent you but really should be on mine but I like that one better. He just sent me an e-mail tonight of the final draft. Which includes an all white one for my back truck window. Oh by the way Goegraphics does all the special graphics for BAJA. I will have to get back to you on price. My size was 10"x 6" on all of them. Hope this helps. SEA-YA REB
#19
Guest
Posts: n/a
Hey Red Stripe Are you looking for the same logo as Jayl13 or the next one after that. Send me your e-mail adress and Ill show you the one Im talking about. I would put it under my OSO name of rebs24baja in that little square but I am having tec-difficulties. Not the sharpest computer dude in the drawer. But I know how to e-mail it. [email protected] SEA-YA REB
#20
Registered
Join Date: Jul 2001
Location: Twin Lake, Michigan
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
rebs24baja, Check your email
I am not sure which one I have to get out and look at the logo on my boat (and I would right now but I'm at work ) but its an 88 so it should be the same you have on your 88. I thought it looked like the avatar under Jayl13 name but maybe its different
Anyway, shoot it over in an email and I will check it out tomorrow!!
Thanks!!!!!!
I am not sure which one I have to get out and look at the logo on my boat (and I would right now but I'm at work ) but its an 88 so it should be the same you have on your 88. I thought it looked like the avatar under Jayl13 name but maybe its different
Anyway, shoot it over in an email and I will check it out tomorrow!!
Thanks!!!!!!