anyone know where I can get baja stickers?
#21
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
88 boats had the one I have
I think that started in 86 or 87 and went to 91
Then when baja sort of redid all their boat designs, that is another thing that changed as well
I could be wrong about the years but as far as I remember that is accurate
Then again hey this sticker would look bad ass on any year baja
Just not a fan of the cursive baja
I think if they put more than 4 minutes of thought into it, they could have something a lot more impressive
Damn and they pay people to come up with this
Man I want a job designing cursive writing and make 250 thou a year LOL
Unfortunately I have to wait on my stickers for now since Im going to paint the boat in the next month or so
So for now im in a holding pattern
If anyone gets them made or has a tie to a vinyl shop somewhere and they want to sell some more, IM IN
Would not mind having one about 1 1/2 feet wide right up on my deck either
what would be nice is this made out of vinyl and sewn on to my engine hatch vinyl that is there now
Hummmmmmm......................................
Jason
I think that started in 86 or 87 and went to 91
Then when baja sort of redid all their boat designs, that is another thing that changed as well
I could be wrong about the years but as far as I remember that is accurate
Then again hey this sticker would look bad ass on any year baja
Just not a fan of the cursive baja
I think if they put more than 4 minutes of thought into it, they could have something a lot more impressive
Damn and they pay people to come up with this
Man I want a job designing cursive writing and make 250 thou a year LOL
Unfortunately I have to wait on my stickers for now since Im going to paint the boat in the next month or so
So for now im in a holding pattern
If anyone gets them made or has a tie to a vinyl shop somewhere and they want to sell some more, IM IN
Would not mind having one about 1 1/2 feet wide right up on my deck either
what would be nice is this made out of vinyl and sewn on to my engine hatch vinyl that is there now
Hummmmmmm......................................
Jason
#23
Guest
Posts: n/a
Hey, if anybody finds a place that is making the decals in different sizes for window applications and such I would be interrested. I also went to a place that digitizes and had them do an embroidery insert for my bolsters. They turned out so nice that I had them make a bigger one for the motor lid. It didn't come out so nice. Nor I am looking for a company that can do an embroidery logo that is large enough for the motor lid and still have the quality that I need. Also the last place I had do the motor lid put the thing on upside down.
#29
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
Damn this thread is still going? LOL
Anyway as for the boats fading gel coat
Boat is going to be painted bow to stern with cusom paint scheme (Team Baja)
So im not worried about the HOOKER BARBIE pink on the sides
as for the stickers, I have to wait until the paint is done and cured all up and THEN ill get the stickers to slap back on there
Honestly I dont care if it is the Baja right and left sides or the centered Baja over the sun, but that is the era im looking for
not the Baja in cursive
When I get these stickers made, Ill add a post to this thread or make a new one if this is too old and written off of here
Thanks again all
Jason
Anyway as for the boats fading gel coat
Boat is going to be painted bow to stern with cusom paint scheme (Team Baja)
So im not worried about the HOOKER BARBIE pink on the sides
as for the stickers, I have to wait until the paint is done and cured all up and THEN ill get the stickers to slap back on there
Honestly I dont care if it is the Baja right and left sides or the centered Baja over the sun, but that is the era im looking for
not the Baja in cursive
When I get these stickers made, Ill add a post to this thread or make a new one if this is too old and written off of here
Thanks again all
Jason
#30
Registered
Join Date: Oct 2000
Location: Kentucky - where the women are so fast we have to put a governor on 'em!!
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Ken 240
Hey Guys,
I traded some e-mails with Ken240, and he was able to get a set made up by a local graphics shop. He also sent me a .gif file of the logo. It is the one like RedStripe posted. As quoted by Ken, he got his "from MW Signworks in Auburn ME (207) 783-7863, who already has the layup done from another guy on the lake. It is a black vinyl base with the vinyl white, yellow and orange laid on top of the black. This will be much more durable than the original decal." He said they cost him about $30 each back in '97, and they are scaleable to any size. He is pretty sure that the shop is still in business, so they probably still have the setup ready for them.
Hope this helps. I'm gonna get a set made later this summer.
I traded some e-mails with Ken240, and he was able to get a set made up by a local graphics shop. He also sent me a .gif file of the logo. It is the one like RedStripe posted. As quoted by Ken, he got his "from MW Signworks in Auburn ME (207) 783-7863, who already has the layup done from another guy on the lake. It is a black vinyl base with the vinyl white, yellow and orange laid on top of the black. This will be much more durable than the original decal." He said they cost him about $30 each back in '97, and they are scaleable to any size. He is pretty sure that the shop is still in business, so they probably still have the setup ready for them.
Hope this helps. I'm gonna get a set made later this summer.