Baja Poker Run boats - where are they now?
01-06-2010, 09:50 PM
#113
Registered
Gold MemberJoin Date: Nov 2007
Location: Henderson, KY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
My drive is raised already compared to other 33's I have seen by 2.5-3" I am going to test when I get to Florida if I ever get down there then go from there. One step at a time.
Last edited by Anchorman; 01-06-2010 at 09:54 PM. Reason: Addittional info
01-06-2010, 09:51 PM
#114
Registered
Gold MemberJoin Date: Nov 2007
Location: Henderson, KY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
01-07-2010, 03:34 PM
#116
VIP Member
VIP Member
01-07-2010, 06:40 PM
#118
Gold Member
Gold Member
Some pics of the painted bilge and wiring going back in. Cleaning up the rats nest as we go.
Should get the boxes on tomorrow. Waiting on some parts for the motors but they should be in on Wednesday so hopefully we can get them in on Wednesday afternoon or Thursday. I have run into several issues on this little project but so far nothing we cant handle.
Should get the boxes on tomorrow. Waiting on some parts for the motors but they should be in on Wednesday so hopefully we can get them in on Wednesday afternoon or Thursday. I have run into several issues on this little project but so far nothing we cant handle.
If you did, what did you do - cut in around that stuff?!
01-07-2010, 07:39 PM
#119
Registered
Gold MemberJoin Date: Nov 2007
Location: Henderson, KY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
If I had had a month and my own shop I would have removed everything, epoxyed the all the holes, and painted it correctly. Instead I cut around everything but yes I did the gunwales and the transom as well. I put two coats in there and I could have put two more on there as well.
Will
01-07-2010, 07:49 PM
#120
Registered
Gold MemberJoin Date: Nov 2007
Location: Henderson, KY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Well the last two days have been educational and a little costly. I finally found all the parts and pieces that I didnt know about. We got the Transom Assym on and the port motor in. Other motor goes in tomorrow. Drives should go in on Monday. Bajakid402 has been working pretty hard. As the weather here has been pretty bad I have had an extra week to assist in almost the whole thing. Here are some more photos.
