Mooring cover for 25 Outlaw
04-22-2002, 04:09 PM
#1
Guest
Posts: n/a
Mooring cover for 25 Outlaw
I'm looking for a full morring cover for my boat (25 Outlaw) to keep on the boat during inside rack storage and occassionally outside overnite. Any recomendations on brand/ best cost would be appreciated. So far I'm leaning towards a Sharkskin (polyester)
or tyvek type cover since It won't see alot of heavy outside duty and to keep the $$ down.
I saw a nice cover on a 33 that had either a draw cord or elasticized edge which held the cover tight to the hull just under the rub rail (no strap loops). This is what I'm looking for but I'm not sure if it was custom made. Never got a chance to ask the guy
who owned it.
or tyvek type cover since It won't see alot of heavy outside duty and to keep the $$ down.
I saw a nice cover on a 33 that had either a draw cord or elasticized edge which held the cover tight to the hull just under the rub rail (no strap loops). This is what I'm looking for but I'm not sure if it was custom made. Never got a chance to ask the guy
who owned it.
Last edited by Luxy60; 04-22-2002 at 10:52 PM.
04-22-2002, 08:10 PM
#2
Registered
Join Date: Apr 2001
Location: minnesota
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
25 outlaw mooring cover
I had a full mooring cover custom made for my 25. Its made out of aqualon fabric which is lightweight and totally weatherproof.
I no longer have the 25 and am interested in selling it. It is red and uses the pole that comes with the cockpit cover. it covers the boat from the rub rail up from bow to stern and is great at keeping dirt,sun, rain,birddoo,off . I paid 500 but would let it go for 300&shipping.
I no longer have the 25 and am interested in selling it. It is red and uses the pole that comes with the cockpit cover. it covers the boat from the rub rail up from bow to stern and is great at keeping dirt,sun, rain,birddoo,off . I paid 500 but would let it go for 300&shipping.
04-22-2002, 10:41 PM
#3
Registered
Join Date: Jan 2002
Location: Davenport, IA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Hey garshev
That sounds like a heck of a deal. If it would fit my Hammer I would buy it. I just got quoted 600+ for the Aqualon, and if I wanted the sides to come down further to protect the grafics from fade, it was another 100.
Hey Luxy60
If it is not worn out, sounds like it might be a good deal.
That sounds like a heck of a deal. If it would fit my Hammer I would buy it. I just got quoted 600+ for the Aqualon, and if I wanted the sides to come down further to protect the grafics from fade, it was another 100.
Hey Luxy60
If it is not worn out, sounds like it might be a good deal.
