Need help with 525 EFI decal
#1
Registered
Thread Starter
Join Date: May 2005
Location: Austin, Texas
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Need help with 525 EFI decal
Does anyone have a file for the 525 EFI sticker that goes on top of the intake, or can someone with a 525 take a picture of the decal with a digital camera and e-mail it to me. It would need to be a close-up taken as straight down and square as possible so it could be scanned. I have a customer that has modified 540's and is wanting to make custom decals for the intake using the font and styling of the 525. Any help would be greatly appreciated. Thanks in advance.
#2
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
Does anyone have a file for the 525 EFI sticker that goes on top of the intake, or can someone with a 525 take a picture of the decal with a digital camera and e-mail it to me. It would need to be a close-up taken as straight down and square as possible so it could be scanned. I have a customer that has modified 540's and is wanting to make custom decals for the intake using the font and styling of the 525. Any help would be greatly appreciated. Thanks in advance.
#3
Registered
Thread Starter
Join Date: May 2005
Location: Austin, Texas
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, but the picture will have to be taken straight down on the top in order to be scanned correctly. Good looking engine compartment though.
Last edited by customtouch; 06-12-2010 at 06:08 PM.
#8
Registered
i make it with Corel draw software.
you need a picture from the original decal. Take the picture without any angle. Direct middle top of it. Than you can rework the decal in Corel draw.
you need a picture from the original decal. Take the picture without any angle. Direct middle top of it. Than you can rework the decal in Corel draw.