Finally found my BAJA
10-27-2012, 04:58 PM
#1
Registered
Thread Starter
Join Date: Jun 2012
Location: Great Lakes
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Finally found my BAJA
after months of searching i finally found a 1995 272 with a 502 mpi not perfect but by far not a pos, came with lots of gear three props 23p tainless, 23p aluminium, and on it theres a bravo 4 blade 26p and the best thing its at my house
10-28-2012, 11:01 AM
#4
Registered
Thread Starter
Join Date: Jun 2012
Location: Great Lakes
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
10-28-2012, 12:30 PM
#5
Registered
Have fun, I just took some more pics in sunlight so I can get mine sold!! Then the search is on!!!
10-28-2012, 01:32 PM
#6
Charter Member #1171
Charter Member
Bought a 272 brand new back in 97,,,,,put over 700 hours on that boat without a hickup.
The 23 Mirage plus was the best I found back then as well,,,,,no way will you turn a 26 Bravo 4 blade.
Congrats,,,,,great boats
The 23 Mirage plus was the best I found back then as well,,,,,no way will you turn a 26 Bravo 4 blade.
Congrats,,,,,great boats
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
10-28-2012, 03:31 PM
#7
Registered
Thread Starter
Join Date: Jun 2012
Location: Great Lakes
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Turns the 4 blade 4800 rpm
and it'll be good if I get a tune filter and cam later on
Last edited by dudz123; 10-28-2012 at 03:34 PM.
10-28-2012, 03:36 PM
#8
Registered
Thread Starter
Join Date: Jun 2012
Location: Great Lakes
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
10-28-2012, 04:28 PM
#9
Registered
That boat looks familiar...was it from ottawa, ON by any chance??
http://ontario.kijiji.ca/c-cars-vehi...AdIdZ415614120
If its this one, be careful. Was beaten pretty hard and had some issues....
http://ontario.kijiji.ca/c-cars-vehi...AdIdZ415614120
If its this one, be careful. Was beaten pretty hard and had some issues....
Last edited by Rambocj7; 10-28-2012 at 05:04 PM.
