342 Owners ?
#11
Gold Member
Gold Member
Hopefull picking up a 2002 342.. and It has new empellers done november 2011. so i am good for a year or 2 BUT i have got to figuer this out. I have had them fail, normally keep a spare ont he boat, but fromt he looks of the bildge its going to be impossible.
I have reas where baja342 removes the lower part of the bak seat with part of the floor with it. Mine has a genny sitting under the seat..... so not sure this is an option. any other ideas/instructions??
I have reas where baja342 removes the lower part of the bak seat with part of the floor with it. Mine has a genny sitting under the seat..... so not sure this is an option. any other ideas/instructions??
Just remove the seat back.
#15
Gold Member
Gold Member
You are only taking out the backrest. You aint gettin the fiberglass bottom out! Good luck on working on the gen set if it ever needs it. There is 1 inch of clearance and literally impossible to work on unless you pull it.
#16
Registered
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
Ok that makes more since but I could have sworn I read that you leave the back rest part and removed the lower back wall and worked unzder the backrest. And that part of the floor came up with it. Maybe I read wrong. Hope the genny does not need work!
If it does can you pull it with out cutting it out? I hope so. I Know on a donzi 33zx you have to cut it out, or at least that's what I read.
If it does can you pull it with out cutting it out? I hope so. I Know on a donzi 33zx you have to cut it out, or at least that's what I read.