Baja Speed Driven up grades
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Belmont
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Baja Speed Driven up grades
Well since the prop is now on order the next thing is small adds to increase performance on my 212 Islander, 350 mag mpi with abravo one drive. Ive ordered a drive shower, nose cone and stainless marine exhaust. Any other ideas.
Mark.
Mark.
#2
VIP Member
Start saving up all your pennies and buy a supercharger. You will pickup at least ten miles per hour. Not much else you can do on a 350 to go faster. Maybe a K&N air filter might help or possibly a computer reprogram by Arizona Speed and Marine.Oh yeah I don't think the nosecone is going to help unless you are already in the 70's. What does your boat top out on GPS?
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#3
Registered
Join Date: Mar 2001
Location: Rochester, MN
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
have to agree with Bigwavz. I would go with the whipple charger, and forget about the nose cone it does nothing unless you are really hauling some butt. oh and with the blower you can buy another prop.
Mark
Mark
#4
Registered
Thread Starter
Join Date: Oct 2001
Location: Belmont
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Ok .Cancel the nose cone, also Arizona speed and marine dont reprogram the 350. Seems like they only do Big blocks. Has anyone had reprogramming done elsewhere? I talked to Whipple today and your all correct. Its the way to go but I,m not sure that the 212 would be too safe at high 70,s.
Mark.
Mark.
#5
Registered
Platinum Member
Join Date: Oct 2000
Location: Old Hickory TN.
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
I ran in the low 80's in a hammer and Brad Perry on the board ran up in the 90's so I think you could run up in the 70's and be ok also if I was going to supercharge I would go with the whipple.
[ 02-11-2002: Message edited by: EWB ]
[ 02-11-2002: Message edited by: EWB ]