Stolen Drives
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
(3) Bravo I XR drives, 1.50:1, standard lowers(not Sptmstr), Imco polished back-caps for hyd. rams, long input shaft for Imco boxes. Stolen nite-time of 8/29/06 - 8/30/06.
Drive ser.#'s
OM159573
OM159581
OM159580
Grasonville, MD. area.....If ya'll don't mind, keep a eye out for these #'s.
Thanks,
Hugh
Drive ser.#'s
OM159573
OM159581
OM159580
Grasonville, MD. area.....If ya'll don't mind, keep a eye out for these #'s.
Thanks,
Hugh
#6
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
That sucks Hugh, I'll let my mechanic know to look out for them...Rob
#8
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Angry](/forums/images/icons/icon8.gif)
Just another note on these drives guy's,
they came off of IMCO extension boxes so they have a long input shaft. The center drive has a chip taken out of the skeg and they had IMCO steering plates with both short tie bars.
Like Hugh said, thanks for any help.
John S.
they came off of IMCO extension boxes so they have a long input shaft. The center drive has a chip taken out of the skeg and they had IMCO steering plates with both short tie bars.
Like Hugh said, thanks for any help.
![Big Grin](/forums/images/smilies/biggrin.gif)
John S.
#9
Forum Regulator
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Taken right off one of the lots John? Did the have drive locks?