New Livorsi Gages Installed!!
#1
Registered
Thread Starter
![Thumbs up](/forums/images/icons/icon14.gif)
Finally finished installing my new gages, stereo and Jackplate switch. Tim Parsons did an outstanding job rewiring behind the dash!! If anyone needs custom work done in the Palm Beach area I can put you in touch with Timmy!!
#4
Registered
![Default](/forums/images/icons/icon1.gif)
Awesome. Great Livorsi dials. love the jackplate switch location. Mine is on the left by the key. Do you run your pulsare in the ocean? I'm worried about running mine in the ocean it is freshwater only so far and its mint. Worried the salt is gonna ruin it.
#5
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I run the ocean every weekend. I've been saltwater boating my entire life and have never experienced a breakdown due to saltwater. You can protect your motor by removing the Cowl and spraying the motor down with Boshield or Marine CRC. The saltwater will not effect the boat at all. My Jackplate switch was also on the left side. When I removed the original switch I filled the hole with a overheat warning lamp.
Thread
Thread Starter
Forum
Replies
Last Post
GAUGETHIS
General Boating Discussion
51
01-15-2004 08:24 AM