25 or 28 with ob's
#14
Guest
Posts: n/a
SCT
As you may know Mike Burris has a 25 w/2 omc's for sale on S&F. Trade Winds in IL had a 28 Last Fall w/2 200 stockers. Sharky has a real nice 28 w/2.5's but I don't thinks its for sale, Good for reference though. There is another on S&F w/22" brackets w/mercs. The 28's are nice w/a big cabin. Kinda small cockpit.
I you may recall I rigged and sold my 1985 convincor. I rigged it with 2 nice running bridge ports on manual CMC brackets righ on the transom. This boat flew like a big hydro stream. It was quite a site at very close to 80 w/26 choppers at close to 8000. It did have the annoying hop that these early designs were know for. I can contact the guy that has it if you wnat me to.
It was a nice 60MPH boat w/a Monte V8. It was much more fun with the twins but you had to know how to drive it. Hammer it through the hop/pull up the K-planes and hang on.
As you may know Mike Burris has a 25 w/2 omc's for sale on S&F. Trade Winds in IL had a 28 Last Fall w/2 200 stockers. Sharky has a real nice 28 w/2.5's but I don't thinks its for sale, Good for reference though. There is another on S&F w/22" brackets w/mercs. The 28's are nice w/a big cabin. Kinda small cockpit.
I you may recall I rigged and sold my 1985 convincor. I rigged it with 2 nice running bridge ports on manual CMC brackets righ on the transom. This boat flew like a big hydro stream. It was quite a site at very close to 80 w/26 choppers at close to 8000. It did have the annoying hop that these early designs were know for. I can contact the guy that has it if you wnat me to.
It was a nice 60MPH boat w/a Monte V8. It was much more fun with the twins but you had to know how to drive it. Hammer it through the hop/pull up the K-planes and hang on.
#15
OSO Content Provider
Commercial Member
Re: 25 or 28 with ob's
Originally posted by checkmate zt
Anyone know of any for sale?
thanks
Anyone know of any for sale?
thanks
The boat was rerigged with new Merc 2.5 EFI Offshores and Gaffrig guages. I am in the process of upgrading the propshafts to the thicker models.