1987 Chris Craft - 41' Stinger
#31
Registered
BTW, that 41 in the auction is not a Stinger. The 41 stingers had a tall raised deck, square windshield, and porthole windows on the hull sides. I would be very cautious here, there could be a reason the boat is titled under a different vin. Insurance scams, stolen, etc.
#32
Registered
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Here is a a pic of a 87 415. With the Arch being different directions I can not see port windows and the glass is curved at the bottom. It is hard to see in that area. I got this from Chris Craft
#33
Registered
Looking at the pics again, I'm starting to see the Formula guys' points. There could very well be a 390x underneath some modifications. They boxed in the rear ventilation and made it line up to a Furmula style rear end. Inside the bilge the transom looks flat. On my 375 which has a molded in platform, you can see the mold from the inside. The dash is close enough to have been modified. Look at the shifter controls. They have the same style box all the way down. They updated the look with the Taylormade glass with that little custom aluminum piece to bridge the gap to the arch.
When you get it, take a look at the structural stuff, like where and how the gas and holding tanks are mounted, and compare it to the other 390 you're getting. It just might be that someone had a 390x in the mid nineties and instead of spending a fortune on a new boat, threw 10k in modifications at it and had themselves a very nice updated Stinger.
When you get it, take a look at the structural stuff, like where and how the gas and holding tanks are mounted, and compare it to the other 390 you're getting. It just might be that someone had a 390x in the mid nineties and instead of spending a fortune on a new boat, threw 10k in modifications at it and had themselves a very nice updated Stinger.
Last edited by Joyride; 04-11-2007 at 10:51 AM.
#34
Registered
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Looking at the pics again, I'm starting to see the Formula guys' points. There could very well be a 390x underneath some modifications. They boxed in the rear ventilation and made it line up to a Furmula style rear end. Inside the bilge the transom looks flat. On my 375 which has a molded in platform, you can see the mold from the inside. The dash is close enough to have been modified. Look at the shifter controls. They have the same style box all the way down. They updated the look with the Taylormade glass with that little custom aluminum piece to bridge the gap to the arch.
When you get it, take a look at the structural stuff, like where and how the gas and holding tanks are mounted, and compare it to the other 390 you're getting. It just might be that someone had a 390x in the mid nineties and instead of spending a fortune on a new boat, threw 10k in modifications at it and had themselves a very nice updated Stinger.
When you get it, take a look at the structural stuff, like where and how the gas and holding tanks are mounted, and compare it to the other 390 you're getting. It just might be that someone had a 390x in the mid nineties and instead of spending a fortune on a new boat, threw 10k in modifications at it and had themselves a very nice updated Stinger.
I am taking a chance that is the case. I will know alot more once I see it. What is your thoughts on the other one? If I wanted to sell it like it is? Or would to sink money into it and try to sell it for 30g? Or sell it as is and take that money and put it into the nicer boat.
Mike
#35
Registered
I am taking a chance that is the case. I will know alot more once I see it. What is your thoughts on the other one? If I wanted to sell it like it is? Or would to sink money into it and try to sell it for 30g? Or sell it as is and take that money and put it into the nicer boat.
Mike
Mike
If it's too much to fix the side of the boat. Transfer the motors and drives to the nice boat and your done. Sell that other hull for a few thousand (When they're stripped, they don't bring much).
#37
Registered
#39
Registered
Thread Starter
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Picked one of them up on friday here are a few pic's
Everything looked very sound and solid. except for the back seat and deck lid. The boat was updated looking at everything face to face you can see signs. The dash panel was all new you can see new fiberglass. Also the same with the exhaust. It was not factory. I will have LOTS of questions so be ready!. I have had boats all my life just not HP ones. I am good with a wrench just need some knowledge!!
Mike
I can not get the pics to load I will try later
Everything looked very sound and solid. except for the back seat and deck lid. The boat was updated looking at everything face to face you can see signs. The dash panel was all new you can see new fiberglass. Also the same with the exhaust. It was not factory. I will have LOTS of questions so be ready!. I have had boats all my life just not HP ones. I am good with a wrench just need some knowledge!!
Mike
I can not get the pics to load I will try later