260 Tabs
08-13-2007, 12:41 PM
#1
Registered
Thread Starter
Join Date: Jun 2004
Location: Jacksonville, Fl
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
260 Tabs
to the guys w/ the 260's does anyone have anything other than Bennett tabs on your boat ? If so what kind, size and how do they perform ? I've got Bennett tabs, I think about 12" x 12 or 13" something like that, i havn't measured them in a while. I'm thinking that a longer tab would help with the ride. I have a family member that runs a machine shop w/ a C&C Lathe and have even thought about getting him to make an extention to bolt up to the Bennett tabs but I'm not sure of the added stress or if the hydraulics would hold it. What do yall think ? I don't think they're giving those K-Planes away, but if they did, I'd take a set and while they're at I'll have a set of the Merc 525's. Can I get a HELL YEAH...
Last edited by gbcoker; 08-13-2007 at 12:44 PM.
08-14-2007, 12:05 PM
#3
Registered
Thread Starter
Join Date: Jun 2004
Location: Jacksonville, Fl
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
All I can say is "WOW" that's fast for a stinger.
I think i can speak for everyone on this. Tell us what engine work have you had done and what outdrives are you runnig and what wheels are you spinning and do you have hydraulic steering? Send some pics....
You say you have 24 K-planes, do they enable you to pick your drives up without having to drag them so hard.
I think i can speak for everyone on this. Tell us what engine work have you had done and what outdrives are you runnig and what wheels are you spinning and do you have hydraulic steering? Send some pics....You say you have 24 K-planes, do they enable you to pick your drives up without having to drag them so hard.
