Non Stepped Kevlar Guns don't like shorter drives
#11
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
No problem with # 6's. Requires no positive trim below 70 mph. Boxes may help.
Try swapping your prop rotation first before adding spacers???
Try swapping your prop rotation first before adding spacers???
#12
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by WildWarrior
With the drives completely out @ 80+ she isn't loose at all , almost like a barge ,before if you set the drives out past position 5 or so she was real loose and would chine walk like hell over 75mph.
#13
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Von Bongo
Intereting my 97 Kevlar gun doesn't chine walk at all up to WFO which is 80mph. Full cabin boat though so that might make a difference. Standard bravo I's
It helps a with the porpoising as well as getting her on top of the water at speed.
That's where we came up with the 2 1/2" spacers on my 2" shorties.
I will be testing on Sat if all goes with Max Machine this week, and I will post my results.
Thanks for the help! Glen