Replaced TRS with Konrad 540's
#12
Registered
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,892
Received 436 Likes
on
289 Posts
switching to Konrad solve one part of the older TRS for sure Drive speaking... But, I though the rest (transom plate, gimbal, transom bearing and all related parts besides the drives) were discontinued, thus making repairs / maintenance tougher finding parts??? Can we still get all those parts easily?
#13
Charter Member#330
Charter Member
You can buy the replacement 2 ways. one is just replace the the helmut and the other is the whole transom assembly. Which is what i did and it looks like Ex did also.
It is an easy switch out. I did mine in one day.
Mark
It is an easy switch out. I did mine in one day.
Mark
__________________
If you like it rough do it OFFSHORE!!!
If you like it rough do it OFFSHORE!!!
#14
VIP Member
VIP Member
About the house.........
Sorry the house you wanted sold.......but a couple of houses down from that house is one for sale. This one is a fairly new rebulid. Looks great. Think it is priced in the 700's though.
About the Konrads...............
There is a shop in Edgewater...MDG Performance located at Londontown Marina, ask for Dave. They did a first class job. They really know their stuff, and I spent alot of time trying to locate a really good shop.
They have tons of experience with performance boats. I really want to thank them again for a great job. I would highly recommend their work. If anyone in the Maryland area needs
some work on their boats........give them a call at 410-956-5381. I'm going to use them again for sure.
Sorry the house you wanted sold.......but a couple of houses down from that house is one for sale. This one is a fairly new rebulid. Looks great. Think it is priced in the 700's though.
About the Konrads...............
There is a shop in Edgewater...MDG Performance located at Londontown Marina, ask for Dave. They did a first class job. They really know their stuff, and I spent alot of time trying to locate a really good shop.
They have tons of experience with performance boats. I really want to thank them again for a great job. I would highly recommend their work. If anyone in the Maryland area needs
some work on their boats........give them a call at 410-956-5381. I'm going to use them again for sure.
#17
Registered
Join Date: Jul 2006
Location: blue grass, iowa
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I know I dont have a superboat but an old excalibur but maybe you guys can help me out. i have been restoring this boat for the past 4 years. I was going to change over to a bravo I from the alpha i have now this year but the crankshaft in my 350 broke and i had to build a new motor so i didnt have the money to update the drive this year. I built the motor i was going to run with the the bravo(383 525 hp) knowing the alpha wouldnt hold up long but i didnt think it would eat it up in 3 weekends. I was wrong. could someone point me in the right direction on how to set up the boat for the new power? what bravo drive can i get away with. standard / or xz , xr? I have been told a stock bravo should do just fine. Also i would like to know what x dimension for the best speed. What trim tabs should i use. Any help would be great.
#19
Registered
Join Date: Jul 2006
Location: blue grass, iowa
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
how fast do you guys think my excalibur will run? It should be around 515 to 525 hp at 6300 rpm. Any idea on what the boat weight is and what prop i should run at least start with. I have a 21 23 and 25 cleavers also 23 and 25 mirage and 19p quicksilver. I need to get rid of some props i think but you never know what will work for your boat.
#20
Registered
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
They look BadA$$ eX27 Great move with a keeper boat like that. Friend of mine just did 540s in his 84 Mistress this past winter and doesn't regret it a minute or a penny ... loves the performance, and security or peace of mind. He tells me each and every time out it 'pays' dividends
He did new gimbles whole transom assembly option ...
He did new gimbles whole transom assembly option ...
Last edited by NJgr8ful; 08-25-2007 at 09:27 PM.