Cigarette Bullet Prop Advice
#1
Registered
Thread Starter
Cigarette Bullet Prop Advice
I rebuilt and upgraded my original HP 420's. I bored the bottoms .30 over, bought dart heads and RPM Perf Air Gaps with 750 Holley Carbs. My engine builder told me I am around 500HP per engine. Previously, I was running 22 Hydromotive Quad 4's on TRS drives and gettiing 5200 RPM at wide open throttle. Now with the new engines I am only getting 4800 RPM's with the same props. What props should I change to?
#4
Registered
Any good reference materials to learn about prop selection, websites, etc. I'm willing to do the reading, just having trouble with the technical aspects, and looking for a good baseline [layman] website or book to start.
#5
VIP Member
VIP Member
The best thing that you guys can do is start a thred in the prop section. Julie from Throttle Up and Brett from BBlades are very knowledgeable.
Evan,
I'm doing great....except for this cold weather!!!
Evan,
I'm doing great....except for this cold weather!!!
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
Thread
Thread Starter
Forum
Replies
Last Post
dockrocker
General Boating Discussion
0
07-28-2003 07:36 AM