flat deck headliner
03-10-2008, 02:05 PM
#2
Neno the mind boggler
VIP Member
Are you referring to the size of the panel against the size of the cabin door opening? If so, yes it can be rolled or bent in a way to fit it through. Its tricky but I've done it, you have to sort of hook your foot under the bottom edge and get it to roll in a big "C" shape to get it through, its a two man job for the most part.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Platinum Member
03-10-2008, 05:35 PM
#5
Registered User
Are you referring to the size of the panel against the size of the cabin door opening? If so, yes it can be rolled or bent in a way to fit it through. Its tricky but I've done it, you have to sort of hook your foot under the bottom edge and get it to roll in a big "C" shape to get it through, its a two man job for the most part.
