Adding intercoolers to 575's
#2
Registered
Join Date: Jul 2006
Location: Ft. Lauderdale Florida & Tarpon Springs Florida
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
#3
![Default](/forums/images/icons/icon1.gif)
you dont have clearance and will need scoops, go to arizona speed and marine, look at there site, get a smaller pully and a have them remap you chip, i did now my motors run about 635hp
#4
Registered
![Default](/forums/images/icons/icon1.gif)
We did the Whipple intercoolers on the 575's in the Mystique. They really come alive with a decent roller cam. The stock cam in the 575 is a very mild flat tappet.
#5
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,848
Received 3,241 Likes
on
1,050 Posts
![Default](/forums/images/icons/icon1.gif)
The intercoolers add about 50hp a side no?
#7
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
#9
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Innovation did the same to the ones in my Comp. (625 +/-) and they run great. I was talking with Ron Potter and he tells me with an intercooler, and cam change we can take them to a fairly reliable 700hp in the future.
#10
Registered
Join Date: Sep 2006
Location: Richmond - Ophelia, Va
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I had the ASM Kit on mine. In the process of installing the Whipple kits now. New springs and Cometic head gaskets.
Put one motor together yesterday and the other is coming apart this week. Blowers are out being reworked. Hope to be in the water in about 30 days and will have some real numbers to compare.
The Whipples will not clear without cutting.
Put one motor together yesterday and the other is coming apart this week. Blowers are out being reworked. Hope to be in the water in about 30 days and will have some real numbers to compare.
The Whipples will not clear without cutting.
Last edited by ciaoderhead; 06-06-2008 at 08:18 AM.