need some advice on some graphics
#11
Registered
VIP Member
Join Date: Oct 2007
Location: Bologna - Italy & Channel Islands, So. Cal.
Posts: 695
Likes: 0
Received 1 Like
on
1 Post
IMHO the best it's n. AP 002X without the magenta stripe , if you need some (magenta or burgundy ) do the bolt in that color but leave the Cigarette logo black !
I have too that kind or green mint ...I hate it !!!
I have too that kind or green mint ...I hate it !!!
#12
VIP Member
VIP Member
ap002x is sweet
#15
Platinum Member
Platinum Member
I would do one of two things after removing the stars:
Leave it with just the original striping.
or
Add the Cigarette script where the stars were (above the stripe and slightly more subtle than in picks 4/5)
Leave it with just the original striping.
or
Add the Cigarette script where the stars were (above the stripe and slightly more subtle than in picks 4/5)
#17
VIP Member
VIP Member
#18
Registered
I like #4. If it was my boat I'd just remove the stars and leave it until I was ready to make bigger changes.
#19
Registered
Join Date: Mar 2005
Location: Sarasota, FL
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
My 2 cents -
I have a BFA in Fine Arts and own a Cig, so this is my opinion.
The front of the boat is to heavy on graphics. It looks like the flow of the design is strongest in the middle - therefore, the stripe (vertical) is the direction the design should go (flow) across the top to the other side
I would make that stripe thicker (new design) and run in across to the other side. Ask your guy to work on that objective. I do like the Cig script, but I would put it on the top (front of each deck longways) and remove the stars.
One other thing. I have an 88 Cafe and I am torn on a repaint of the original design. As an artist, I am staying with the original design DONE BY the Artist at the factory.
I have a BFA in Fine Arts and own a Cig, so this is my opinion.
The front of the boat is to heavy on graphics. It looks like the flow of the design is strongest in the middle - therefore, the stripe (vertical) is the direction the design should go (flow) across the top to the other side
I would make that stripe thicker (new design) and run in across to the other side. Ask your guy to work on that objective. I do like the Cig script, but I would put it on the top (front of each deck longways) and remove the stars.
One other thing. I have an 88 Cafe and I am torn on a repaint of the original design. As an artist, I am staying with the original design DONE BY the Artist at the factory.