Keeping wheel centered !!
#13
Registered User
![Default](/forums/images/icons/icon1.gif)
dont you worry, there is no shortage of dumb guys here..
when i redid the dash in the cafe, i didnt even think about it... thats how dumb i am
what i always did when i shut it down at the dock, i would always turn the wheel the way it was supposed to go.... this way i looked like i knew what i was doing.... after a while, it became second nature....
the wheel looks so much better than most, it looks better upside down, then most do upright.....lol
Great looking dash Dave
when i redid the dash in the cafe, i didnt even think about it... thats how dumb i am
what i always did when i shut it down at the dock, i would always turn the wheel the way it was supposed to go.... this way i looked like i knew what i was doing.... after a while, it became second nature....
the wheel looks so much better than most, it looks better upside down, then most do upright.....lol
Great looking dash Dave
#15
Registered
![Default](/forums/images/icons/icon1.gif)
I don't know if this works or not, but I ran across this post about centering the wheel.
ON the IMCO full hydraulic system you simply take the wheel to the stops (whil;e counting the turns) and hold it. The pressure relief valve opens; you count the turns back to center: and voila! wheel is centered.
The wheels cget out of alignment due to the pounding they take and the relief valve is constanly opening a tad bit eventually causing the alignment to get out of whack...
The wheels cget out of alignment due to the pounding they take and the relief valve is constanly opening a tad bit eventually causing the alignment to get out of whack...
#16
Registered
![Default](/forums/images/icons/icon1.gif)
BGIII, Makes sense. probably can center it that way it may take more than one try. Then next time you use it you will likely need to do it again.
I think there are better things to spend your time on then centering the wheel.
I think there are better things to spend your time on then centering the wheel.
#17
Registered
![Default](/forums/images/icons/icon1.gif)
dont you worry, there is no shortage of dumb guys here..
when i redid the dash in the cafe, i didnt even think about it... thats how dumb i am
what i always did when i shut it down at the dock, i would always turn the wheel the way it was supposed to go.... this way i looked like i knew what i was doing.... after a while, it became second nature....
the wheel looks so much better than most, it looks better upside down, then most do upright.....lol
Great looking dash Dave
when i redid the dash in the cafe, i didnt even think about it... thats how dumb i am
what i always did when i shut it down at the dock, i would always turn the wheel the way it was supposed to go.... this way i looked like i knew what i was doing.... after a while, it became second nature....
the wheel looks so much better than most, it looks better upside down, then most do upright.....lol
Great looking dash Dave
god i miss her.... give her a hug for me....
![Evil](/forums/images/smilies/evilB.gif)
give me a call tomorrow, ill gve you jc perfs number
201-726-4713