stainless marine or emi thunder what would you use?
#1
Registered
Thread Starter
stainless marine or emi thunder what would you use?
Just looking for advce or opinons,trying to decide on which exhaust system to buy,ssm long ss riser or emi thunder long riser it is for a 540 n/a bravo1 set up I don't like headers more on that another time,what have you guys used thnks. Counting down the days to spring
#4
Registered
Again, Stainless Marine.......
#10
Lakeside Restorations.com
Commercial Member
Both are good systems & work well.
Emi has a warranty as well.
Based on your engines you would want the long tails regardless of brand. If your cam's exhaust profile is too big then you may want to consider dry pipes which are available from both SM & EMI.
As far as SM's HT3's I dont see it hurting you, but it may be a bit overkill and it will be even more costly over the standard SM HT kit or the EMI kits with or without dry pipes..
Jamie / Lakeside
Emi has a warranty as well.
Based on your engines you would want the long tails regardless of brand. If your cam's exhaust profile is too big then you may want to consider dry pipes which are available from both SM & EMI.
As far as SM's HT3's I dont see it hurting you, but it may be a bit overkill and it will be even more costly over the standard SM HT kit or the EMI kits with or without dry pipes..
Jamie / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]