Stellings On Side x Sides
#3
Platinum Member
Platinum Member
Green Stellings
I found my Stellings application chart. The Green style measurement from the crank centerline upward to the centerline of the collector is 20.25". The horizontal distance from the crank centerline to the outside of the header tube is 16.25" and the horz. distance from the crank centerline to the centerline of the collector is 13.5" They state that the minimum engine center to center dimension is 33". Hope this helps. It seems as if they will fit from what I remember about side-by-side Cigarettes. Let me know if I can help on anything else.
Gary
612-247-7081
__________________
Gary
612-247-7081
__________________
#6
VIP Member
VIP Member
I've always liked the looks of them, what is the difference between the green and black, is it performance? or diff alloy?
#8
Registered
Join Date: Sep 2003
Location: Newport, MI
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Thread Starter
Ok Correct Me If Aam Wrong. After Talking With A Few People About Headers, They Have Told Me That My Stainless Marine Gen3 Manifolds will perform better On My Blower Motors Than Headers. But If They Were N/A Motors Headers Would Be A Better Choice Do To Scavaging Reasons. But On A Blower Motor The Exhaust Is Being Pushed Out Due To The Blower. My Stainless Marines Have 2x2 Ports, 4" Collectors And 5" Tails. Seems Like They Would Have Adiquate Flow???
#10
VIP Member
VIP Member