cigarette flat deck F/S 572's
11-16-2012, 09:03 PM
#21
Registered
Delamination of an old repair, is exactly what the email I got said, also said it was one of the reasons the boat wasn't being used.
Bill
11-16-2012, 11:02 PM
#23
Registered
Thread Starter
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
fixx
NO! lets just say that its going to be in good hands,,bill is most likely pulling the engines,,will probably have them inspected,they are low compression engines and if i were bill i would look for a set of 1071's before i put those engines in his 38 tg kevelar hull..
11-17-2012, 12:46 AM
#24
Registered
Platinum MemberJoin Date: Mar 2008
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
I have already lined up a friend/mechanic to pull the motors and go through them like Jim suggested (mostly the heads and springs). They are already red to match my Top Gun! Jim's Cig will provide the parts I have needed to bring the Top Gun back to life. The engines are already pushing the power capabilities of the SSM IIIs, so blowers are not likely in my plans. I owe you one on the tip. Onwards, Bill
11-17-2012, 06:51 AM
#25
Gold Member
Gold Member
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,639
Likes: 0
Received 209 Likes
on
133 Posts
Mike,
I have already lined up a friend/mechanic to pull the motors and go through them like Jim suggested (mostly the heads and springs). They are already red to match my Top Gun! Jim's Cig will provide the parts I have needed to bring the Top Gun back to life. The engines are already pushing the power capabilities of the SSM IIIs, so blowers are not likely in my plans. I owe you one on the tip. Onwards, Bill
I have already lined up a friend/mechanic to pull the motors and go through them like Jim suggested (mostly the heads and springs). They are already red to match my Top Gun! Jim's Cig will provide the parts I have needed to bring the Top Gun back to life. The engines are already pushing the power capabilities of the SSM IIIs, so blowers are not likely in my plans. I owe you one on the tip. Onwards, Bill
11-17-2012, 06:07 PM
#29
Registered
Platinum MemberJoin Date: Mar 2008
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
