Nauti by Nature Cigarette 38 Top Gun Refresh!!
04-22-2016, 04:53 PM
#352
Registered
Tommy is doing it.. I like it!
http://www.***************.com/chief...ush-hp-limits/
EDIT: cant post a link from power boat nation I guess ..
http://www.***************.com/chief...ush-hp-limits/
EDIT: cant post a link from power boat nation I guess ..
Now, thanks to the continuing efforts from Tommy and his team you can get 1890 HP at 6200 RPM from these engines on C16 and 1576 at 6400 RPM on 93 Octane pump gas from the local station. This incredible accomplishment had been done with painstaking determination and drive from Tommy. If you remember he went from 1350/1550 to 1350/1740 after writing new code and mapping plus a new turbo and now 1575/1890 again after tons of work on a new map and fine tuning the cam shaft details.
04-22-2016, 07:31 PM
#354
Registered
I'm only 5'8" maybe you have short man syndrome you came into my thread beating your chest remember?? Let me know when the mph matches the paint job... First you said 1400 on pump gas I don't know the limitations of octane, cylinder pressure regiritated bs etc. Now it's endurance. Maybe you should stick to repairing A/C ... You didn't vote for trump did you? He is going to send your ass back home with the other immigrants, at least you can keep the A/C going on the banana boat!
04-23-2016, 07:02 AM
#356
Registered
I look forward to seeing your engine project, and results. When do you think that will start? Or are you planning on the 6s first?
One more, why not Arnesons instead of 6s? I was kicking it around, but I really don't want to dump the $50K into an old boat, I'd rather build a kickass shop/garage behind the house and live with what I have in the boat now.
One more, why not Arnesons instead of 6s? I was kicking it around, but I really don't want to dump the $50K into an old boat, I'd rather build a kickass shop/garage behind the house and live with what I have in the boat now.
04-23-2016, 08:33 AM
#357
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
We are putting up a 60'x24' garage in a few months! 6's will be the next project. My engines are pretty close to where they will be after 6's are installed (only moving down an inch or 2). Last guy got carried away with raising the x on this boat to the moon. That means my brand new trans just need the tail conversion and my brand new exhaust will also work!
New engines after these are worn out. Not in any hurry hopefully they last for years!!
My wife loves this boat so we dont ever plan to sell it, new paint and interior will come eventually!!
New engines after these are worn out. Not in any hurry hopefully they last for years!!
My wife loves this boat so we dont ever plan to sell it, new paint and interior will come eventually!!
05-18-2016, 03:03 PM
#359
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
One of mine has always had a repaired (welded) set of rotors. That engine likes to stall while docking. Looking for a 420 so I can change out these repaired rotors.
Do you know of one for sale?
Do you know of one for sale?
