Top gun hatch arm!
#5
Registered
![Default](/forums/images/icons/icon1.gif)
I would like one. If I come up with an alternative end design for the roller bearing setup, can you make it?
Also posted this in the other thread.
Check out how the lifting point / bearing housing attaches to the rod (upper right in pic), pretty simple design. You can just make the end solid with a thru hole, and I can make the bearing housing and rod assembly here, or you could design as a package?
[ATTACH=CONFIG]520279[/ATTACH]
Can you PM me with a quote for the "as-is" that you posted?
Also posted this in the other thread.
Check out how the lifting point / bearing housing attaches to the rod (upper right in pic), pretty simple design. You can just make the end solid with a thru hole, and I can make the bearing housing and rod assembly here, or you could design as a package?
[ATTACH=CONFIG]520279[/ATTACH]
Can you PM me with a quote for the "as-is" that you posted?
Last edited by frickstyle; 03-14-2014 at 07:26 AM.
#7
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I would like one. If I come up with an alternative end design for the roller bearing setup, can you make it?
Also posted this in the other thread.
Check out how the lifting point / bearing housing attaches to the rod (upper right in pic), pretty simple design. You can just make the end solid with a thru hole, and I can make the bearing housing and rod assembly here, or you could design as a package?
[ATTACH=CONFIG]520279[/ATTACH]
Can you PM me with a quote for the "as-is" that you posted?
Also posted this in the other thread.
Check out how the lifting point / bearing housing attaches to the rod (upper right in pic), pretty simple design. You can just make the end solid with a thru hole, and I can make the bearing housing and rod assembly here, or you could design as a package?
[ATTACH=CONFIG]520279[/ATTACH]
Can you PM me with a quote for the "as-is" that you posted?