1986 Cigarette 28 SS last one?
#31
Gold Member
Gold Member
Thread Starter
Join Date: Jun 2013
Location: Austin Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
[ATTACH=CONFIG]552949[/ATTACH]
Ok. Now the work begins. Small leak under port gimbal housing inside the engine compartment. Started to look for the source of the leak and discovered that the outer port exhaust though the transom had been leaking water for some time. Now it’s time to pull both engines, and replace the transom. Unless I find a super deal on a 38’ in need of engines,,, the resto begins now. The exhaust has always sat lower than desired, so this will give me the opportunity to raise the exhaust 4” out of the water, and repaint the transom. Man my wife loves this boat :P
Ok. Now the work begins. Small leak under port gimbal housing inside the engine compartment. Started to look for the source of the leak and discovered that the outer port exhaust though the transom had been leaking water for some time. Now it’s time to pull both engines, and replace the transom. Unless I find a super deal on a 38’ in need of engines,,, the resto begins now. The exhaust has always sat lower than desired, so this will give me the opportunity to raise the exhaust 4” out of the water, and repaint the transom. Man my wife loves this boat :P
Last edited by Yaroshc; 03-25-2016 at 02:08 PM.
#33
Registered
Join Date: Nov 2008
Location: Chicago,IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Cig 28
Hi guys,
I just happened to come across this article. I have the last, at least I think, 28 Cigarette made. Mines a 1997 and I bought it 16 years ago. I still love the boat !!! Thanks, Paul
I just happened to come across this article. I have the last, at least I think, 28 Cigarette made. Mines a 1997 and I bought it 16 years ago. I still love the boat !!! Thanks, Paul
#35
Platinum Member
Platinum Member
Im guessing this it. Sweet looking boat, if it is! For some reason youtube link would not paste. But i just searched 1997 28 cigarette on youtube.
Last edited by Got Cigs; 01-05-2018 at 03:27 PM. Reason: link would not paste
#36
Registered
I was at the old Cigarette factory back in 1998 or 1999 for a tour and was fortunate enough to see the 28SS hull mold laying out back. The young man giving me the tour said he had drug the old mold out and made himself a single engine 28SS, I believe he said it was the last one made.
#38
Gold Member
Gold Member
Thread Starter
Join Date: Jun 2013
Location: Austin Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Yes its time. I paid 14K to repair the transom with composite, and just dont have time to put her back together.. Going to sell at a huge loss. Need the space. What should I ask