jsbrowni

I got it started! The starter relay, i think, which is next to the cannon plug and has 4 wires(2medium and 2 small at base) running to it had a broken terminal; one of the smalls which was blk. plus found a broken blk 8-10 gauge wire broken off the ground mounted to the rear bell housing area. At first I though the 2 smaller wires might be the end of neutral safety switch so I made a jumper since the shifters had already been disabled but no luck. So, I repaired the broken terminal and all is good!
Thank you for all your responses. Especially Zero Patience and Lil Red.
Regards,
Shawn

Zero Patience

My pleasure, glad it helped, great it's running .