Mistress repower #2 begins....
#241
Gold Member
Gold Member
I installed cams the other night, was told they should be ok but we decided to double check them and the degree wheel came out, installed right where they need to be, happy to move forward, set heads on to see how ports line up, looks good there, very little gasket trimming needed on a few corners, soon they will look like engines!!! set a old carb just for the pic!!
[ATTACH=CONFIG]539892[/ATTACH][ATTACH=CONFIG]539893[/ATTACH][ATTACH=CONFIG]539894[/ATTACH]
[ATTACH=CONFIG]539892[/ATTACH][ATTACH=CONFIG]539893[/ATTACH][ATTACH=CONFIG]539894[/ATTACH]
That bridge indicator and degree wheel look familiar.
#243
Gold Member
Gold Member
#247
VP of the tickfaw200