Mistress repower #2 begins....
#942
Gold Member
Gold Member
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,638
Likes: 0
Received 209 Likes
on
133 Posts
right, so I figure stripped and headers maybe 670 hp at absolute best, not horrible but nothing amazing enough to have a cam that I am being told is going to cause issues later, guys also made similar or better numbers with shelf cams at 5400-5500 rpm... it is not about being butthurt I am over that, but it is annoying to know I spend 30,000+ to have engines that might have issues with valvetrain...
#943
Registered
Same comment on other thread , since FF is doing this on both, I need to say/ask on both:
Remember, Full Force has lower compression. What was the exact # FF ?
Remember, Full Force has lower compression. What was the exact # FF ?
#948
Registered
Did you ever dyno your old motors or did they come with sheets?
So why not spend the money now and get a proven cam that is going to give you your power and not destroy your valve train?
I know you said you had reached your thresh hold of spending but different cams sounds like preventive measures, and if money why not new cams and I take it you would need to buy new lifters also instead of spending money on a dyno?
So why not spend the money now and get a proven cam that is going to give you your power and not destroy your valve train?
I know you said you had reached your thresh hold of spending but different cams sounds like preventive measures, and if money why not new cams and I take it you would need to buy new lifters also instead of spending money on a dyno?
Last edited by tommymonza; 02-16-2016 at 11:06 AM.