Tiger upgrades
#411
VIP Member
VIP Member
Thread Starter
been a while since this cover has been on it, nice to see the swim platform and drives back on it too.
The following users liked this post:
abones (01-18-2019), H20W8STER (05-06-2020), hogie roll (01-18-2019), ICDEDPPL (01-18-2019), kjm5125 (01-19-2019), Knot 4 Me (01-18-2019), kvogt (01-18-2019), Madman7 (01-21-2019), Nate5.0 (01-25-2019), THACAMAROKID69 (01-19-2019)
#413
Registered
Sure is pretty!
#414
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,920
Received 3,390 Likes
on
1,093 Posts
DAAAAAAAAAAAAAYUM that's beautiful!!!!
#415
VIP Member
VIP Member
Thread Starter
thanks guys... i have seen tons of boats, but i have to say to look down the side you really see how bad some molds are. Cig nailed this one and Andys guys in their prep work have made it smooth as glass. I cant wait to get Ceramic coating on it and really get the pearls to pop. I'm also going to coat the new awlgrip bottom that was done by Mark at Rage.
#417
VIP Member
VIP Member
Thread Starter
I love them, its not as quiet as one would think, Corsa makes a nice muffler.. I even put them on the 20, i dont need the cops hassling me for any reason. Corsa also makes one for 1200 hp and up that doesnt affect HP but gives a little break in sound when backing into tiki bars and such.
Last edited by offshoredrillin; 01-20-2019 at 07:53 AM.
#418
VIP Member
VIP Member
Thread Starter
I'll never get back what I have in it, but I would consider realistic offers. I know the number that takes it, and with the exception of the cabin (for now) everything is new.
#419
VIP Member
VIP Member
Do you have spacers in the SCXs? Mine are coming out shortly since I went with low water pickups also. I ran it with out for a few weeks but WP was hit and miss.
Looking Great!!
Looking Great!!
#420
VIP Member
VIP Member
Thread Starter
No I dont, i only had it out a few times so Its not fully dialed in yet, w 30's I was hitting rev limiter at 92 mph, tried 32 labs wmf had for his ts and it didnt like them, so im going to try bretts 32 4 speeds as well as the 30 and see how it runs.. i do have 1/2 inch spacers if needed... going to see how it is with those then putting smaller pulleys on going from 7 to 9lbs and tuning with FU marine.