One of the five becomes a Six
#263
Charter Member#330
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
That thing outa really make some noise now. Not like it didn't before.
Mark
Mark
__________________
If you like it rough do it OFFSHORE!!!
If you like it rough do it OFFSHORE!!!
Last edited by MrCIG; 03-09-2016 at 08:44 PM.
#265
Registered
![Default](/forums/images/icons/icon1.gif)
Looks amazing. Awesome boat. Looking forward to a running vid....
#266
Registered
![Default](/forums/images/icons/icon1.gif)
Zero, Can you PM me the approx. cost of the whipple package? (2x blowers, inter-coolers, pulleys)
Also; what size blowers did you have before, and what carbs were you running? Is this tuned for 93 octane?
Also; what size blowers did you have before, and what carbs were you running? Is this tuned for 93 octane?
#267
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
"It's very tight in there..."
ZP, as usual is being too modest. With the new more efficient coolers, the port engine hit the sea strainer and could not be lowered into position. Soooo, he removed the strainer, cut the bracket apart, fabricated a new bracket, re-welded it and had it back in the boat in about 30 minutes!!
Both engines are in now and we are about to re-install the exhaust. Should have test results soon. [ATTACH=CONFIG]552118[/ATTACH]
ZP, as usual is being too modest. With the new more efficient coolers, the port engine hit the sea strainer and could not be lowered into position. Soooo, he removed the strainer, cut the bracket apart, fabricated a new bracket, re-welded it and had it back in the boat in about 30 minutes!!
Both engines are in now and we are about to re-install the exhaust. Should have test results soon. [ATTACH=CONFIG]552118[/ATTACH]