Crap start to my season
#1
Registered
Thread Starter
Join Date: Aug 2010
Location: Annapolis, MD
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Well, I have the Bullet in the shop for maintenance and I get a call today.. "The number 3 plug electrode is mangled so we checked compression. Number 3 came back at 50psi. Number 5 came back at 80psi". My mind was boggled because I had no issues at the end of last season and RPM's matched, no drop on the one motor in performance. No misfires or anything. So the heads will get pulled and I'm praying its only a valve and we can just redo the top end. They also mentioned the oil was still clean and no evidence of metal from piston getting destroyed, but they still need to see if there is damage after they pull the heads. Hoping not or else this season may be a no go for me. The way it sounds, it may be the start of a problem that could have gotten really bad, but only pulling it apart will tell.. So, I'm pissed, upset and within 2 years, both get redone and upgraded...... Son of a b**tch.....
Last edited by sleev-les; 04-21-2015 at 06:59 PM.
#4
Registered
![Default](/forums/images/icons/icon1.gif)
I`d wanna see that compression test for myself.
Mangled plug is usually bad news but you didn`t notice running one cylinder down?
hmmm something smells fishy and it`s not your girlfriend
Mangled plug is usually bad news but you didn`t notice running one cylinder down?
hmmm something smells fishy and it`s not your girlfriend
#5
Registered
![Default](/forums/images/icons/icon1.gif)
3,5 50+80 psi sounds like headgasket. But, smashed electrode...usually not good. Valve head maybe
#6
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Dave did all of my work as well before I moved to Florida. None better, certainly one of the most honest in the business!!!!! Sorry about your start....but Dave will get it right!
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#7
Registered
![Default](/forums/images/icons/icon1.gif)
X2 on Dave. Never heard anything but good whenever he is mentioned. You are in good hands.
#8
Registered
![Default](/forums/images/icons/icon1.gif)
Let's hope for the best- or should I say the easiest fix
I know what you mean - you put it away and all was well- now after months of sitting - something like this
hang in there!
3pointstar
I know what you mean - you put it away and all was well- now after months of sitting - something like this
hang in there!
3pointstar
#9
Registered
![Post](/forums/images/icons/icon1.gif)
Now would be the time to throw some new CNC heads and different cam in that b itch..
![Ernaehrung004](/forums/images/smilies/ernaehrung004.gif)
#10
Registered
Join Date: Apr 2014
Location: Biloxi, MS
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
That's wild I just went through the same thing 3 weeks ago, so I pulled the motor after finding broken plug and low compression. It turned out I had 3 bent valves and one was fixing to break, it was cracked all the way around the stem.