Bullet Measurement
#1
Registered
Thread Starter
Join Date: Mar 2007
Location: Elmhurst,Il / Ft. Lauderdale
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Bullet Measurement
Can anyone take a measurement on a Bullet with bravo's from the back of the head to the transom for me?
I'm installing KE Billet thermostatic remote filter on the back side of the head and want to make sure there is enough room to get the filter off.
I'm installing KE Billet thermostatic remote filter on the back side of the head and want to make sure there is enough room to get the filter off.
#3
Registered
Thread Starter
Join Date: Mar 2007
Location: Elmhurst,Il / Ft. Lauderdale
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
Ok, finally ran out there. Sorry for the wait.
My boat is an 89 with Bravos. Don't know if that makes a difference or not.
Measured both inner and outer head to transom just to be safe. I had 12" safely, 13" to the very edge of the head. Hope that helps.
Buck
My boat is an 89 with Bravos. Don't know if that makes a difference or not.
Measured both inner and outer head to transom just to be safe. I had 12" safely, 13" to the very edge of the head. Hope that helps.
Buck